Regenerated leather has both the characteristics of genuine leather and PU leather, and is a very common leather fabric today. So what is recycled leather? Let's take a look at recycled leather. Regenerated leather is to pulverize leather or recycled leather raw materials into leather fibers of a certain size, and then mix it with natural rubber, resin and other raw materials, and then compress it into a filter cake; heat the filter cake to make the fibers on the surface layer. Melting is viscous, and each layer is extruded, bonded, dehydrated, dried, sliced, embossed and surface treated to obtain the final product. The regenerated leather has the advantages of moisture absorption and air permeability, and the good workmanship also has the advantages of leather-like softness, elasticity, light texture, strong resistance to extreme high and low temperature, and wear resistance. However, the strength of recycled leather is worse than that of leather of the same thickness, and of course it is worse than PU, so it is not suitable for leather goods with high stress such as shoe uppers. Recycled leather is the use of tanning waste and the scraps produced in the processing of leather goods, which are recycled and processed into high value-added products. As an interlayer, recycled leather replaces cardboard with its unparalleled texture, elasticity, toughness, moisture resistance and processing adaptability; as a fabric, recycled leather can exhibit various performance effects through embossing, printing, and PU compounding processes, which are widely used in a wide range of applications. It is used in the production of leather goods, furniture, book covers, etc.  

To avoid contact with oil, acid and alkaline substances, put the leather jacket in a ventilated place when you take it off, but do not expose it to the sun.  Wipe off water stains with a soft dry cloth, but be careful not to use water or gasoline. If you encounter rain, don't use gasoline to rub, because water will make the leather hard, gasoline can make the leather oil evaporate and dry, accelerating aging.  Leather jacket before the seasonal collection must be cleaned and polished, to the leather supplement "nutrition", so that the leather jacket to maintain a soft and smooth luster, to extend the life. The varnish available leather varnish, with a cloth dipped in some varnish on the leather jacket gently coated - two times. You can also send a professional store for better maintenance.  Collection is best to hang up, leather jacket outside cover a piece of cloth, do not fold, to prevent wrinkles in the leather jacket. If you put it in a box, it must be spread flat and do not put clothes on it.  If a leather jacket is torn or torn, it should be repaired in time. As a very seasonal fashion, leather coats are stored for a correspondingly longer period of time than other garments. Therefore, the correct maintenance and storage is particularly important. Leather clothing in the collection before preservation to dry a little, can not be exposed to the sun, hanging in a cool dry place through ventilation can be, can also turn out the lining to dry. In order to make leather clothing in a longer period of time to maintain the color beautiful, before the collection can be coated with a layer of milk or glycerin on the leather surface, so that long-term storage without discoloration. It is best to use hangers to hang in the closet to keep the leather jacket in good shape and prolong the life of the leather jacket, but do not hang with other tweed, chemical fiber clothing, available cotton cloth with the separation. It is also possible to put it in a box, but it is advisable to put it flat and not folded. This is because if you fold it for a long time, the wrinkle marks will be difficult to recede.  

What is the material of pu leather? PU leather is made by treating the second and third layers of inner leather and defective leather of natural leather through a special film-making process, and covering the surface of the leather with a polyurethane PU surface layer, which makes the surface of the leather appear various colors and multi-colored. Various patterns, without losing the advantages of leather breathability and folding resistance, it has its own uniqueness in appearance and waterproof performance. The emergence of microfiber PU synthetic leather is the third generation of artificial leather. The non-woven fabric of its three-dimensional structure network creates the conditions for synthetic leather to catch up with natural leather in terms of substrate. Combining the newly developed PU slurry impregnation with open-pore structure and the processing technology of composite surface layer, this product exerts the huge surface area and strong water absorption of ultra-fine fibers, making the ultra-fine PU synthetic leather have a beam-like ultra-fine The inherent hygroscopic properties of natural leather of collagen fibers are comparable to high-grade natural leather in terms of internal microstructure, appearance texture, physical properties, and people's wearing comfort.

Mink  Generally mink is a very noble leather, less used in handbag design, usually used in clothing. There are two kinds of mink, American mink and European mink. The benefits are that the mink skin is rarely disabled, the mink skin is of average size and thickness, the fur is evenly distributed, and the color difference is small. There are also considerable differences between the fur of male and female mink. Male mink fur is big and thick, and the coats made from it have a sense of weight, while female mink is softer and lighter to wear, with more usage. The female mink has a narrower and smaller body, shorter hair, fine and lighter hair, long and lustrous surface hair, and more expensive finished products. Generally speaking, the female mink is good, but also according to the preferences of the buyer and with the style and choice.  Pigskin  Because the pig hair through the skin layer directly to the inner layer, so the pigskin breathability and moisture absorption than cowhide good. But the pores are coarse, into the "Pin" type, rough skin pattern, not as beautiful as cowhide, need to be processed to change the shortcomings. Yellow cowhide epidermis is thin, and hair is not dense, hair root into not deep. Skin to, fat glands, sweat glands are not developed, generally used for shoes, leather bags surface. Features: the thickness of pigskin, elastic enough. Buffalo hide hair is sparse, sticky surface rough, there are obvious papillary bumps and folds, the texture of the leather plate is more withered and thin, large and heavy area. Commonly used in making shoes and mechanical wheel belt, after processing to become soft before you can make bags.  Sheepskin  Goat skin fiber organization is more solid, soft and elastic good. Similar to the yellow cowhide, but thinner, the skin surface of the concave and convex lines clear, detailed, strong sense of leather. Sheepskin is similar to goatskin, but the hair bundle of fat glands, sweat glands are more numerous, made of manufactured products, especially soft, stretchy, feel like velvet, but low strength, easy to rot, can only do leather clothing, gloves, can not do shoe uppers and handbags.  PU leather  PU leather is a kind of artificial leather, is the English "ploy urethane", chemical Chinese name "polyurethane". He has excellent wear resistance, excellent cold breathability, and cheap, has become the most popular material for making leather clothing in recent years. And PU leather without the odor of leather, can be washed, easy to maintain, in line with international environmental requirements and composition standards, is a new generation of fashion fabrics. And PU leather is artificial leather, more in line with the love of animals, people and nature in harmony with modern values. If you are interested PU Leather for Garments Leather, please contact winiwpuleather at www.winiwpuleather.com.